ASTM International Publishes New WVTR Tests for Solid Oral Drug Packs

Test methods were developed by a Product Quality Research Institute working group after a 10-year program of study.
  
By Hugh E. Lockhart, PhD
Professor Emeritus, School of Packaging, Michigan State University
 
 ASTM International has published a new test standard for WVTR (Water Vapor Transmission Rate) of solid oral drug packages. The Container Closure Working Group (CCWG) of the Product Quality Research Institute (PQRI) concluded a 10-year program of study of WVTR in solid oral drug packs with publication of the method.
In January 2001, PQRI assigned to the CCWG the task of finding a way to avoid unnecessary stability testing in instances in which moisture permeation is the Critical Quality Attribute and the water uptake of a new package is the same as or better than the existing package.
The Container Closure Working Group has included the following members during the years of research and publication:
James Bergum, Bristol-Myers Squibb
Hugh Lockhart, MSU
Yisheng Chen, Novast Laboratories
Dan Malinowski, Pfizer; group chairman
Rey Chern, Merck
Chris Moreton, FinnBrit Consulting
Ronald Forster, Amgen
Claudia Okeke, USP
Randy Glenn, sanofi-aventis
Dennis O’Reilly, GSK
Rich Hollander, Pfizer
Vicki Penn, PQRI
Desmond Hunt, USP
Susan Zuk, FDA
Don Klein, FDA
The Container-Closure Working Group developed three new methods of test for water vapor transmission of solid oral drug packages. The methods were published by ASTM International in April 2011 as D7709-11e1, Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters.
Previous standard methods available did not provide a clear distinction among the high-barrier multiple-layer package forms—the new
standard does. The methods in the current standard minimize variability and allow clear discrimination among barrier packages currently available for pharmaceutical products. There is a method for bottles, another for high barrier blisters, and a third one for low barrier blisters, such as 5 to 10 mil PVC.
The test duration is two days for low barrier blisters, and 35 days for bottles and high barrier blisters at 40°C, 75% RH. The test is in accordance with ICH climatic conditions.
This standard provides a high degree of precision in the results. Between-laboratory test results have yielded
%RSDs as low as 3–5% for WVTRs in the range of 0.1 to 1.0 mg/day-package. These values are typical of coated and laminated barrier blisters currently in use. Bottles tested by these methods displayed WVTR means in the range of 1.0 to 8 mg/day-bottle and RSD of 2–12%.
Because all data are reported as mg/day-package, the standard provides a means for making a direct comparison between bottles (multiple-dose packages) and blisters (single-dose packages) by taking the dose unit into consideration. The user of the method may assign WVTR values according to
the number of doses contained in a stability-tested approved drug package. The WVTR data then become water gain per unit of medication regardless of the number of units in the package.
The CCWG members are confident that data obtained using D7709 can be used to characterize the WVTR properties of packages in which successful stability testing has been done (e.g., packages for FDA-approved drugs on the market). WVTR data for alternative packages can then be compared with the approved package to reduce the length of time and amount of resources required for choosing and testing alternative packaging for approved drugs.
PQRI was formed in the late 1990s by agreement among several member organizations. At this time, the current member organizations include: the American Association of Pharmaceutical Scientists (AAPS), the Consumer Healthcare Products Association (CHPA), the United States Pharmacopeia (USP), the U.S. Food and Drug Administration (FDA), Health Canada (HC), and the International Pharmaceutical Excipients Council of the Americas (IPEC - Americas).
The standard is based on WVTR research conducted by the CCWG during the years 2001 to 2010. The research reports are available at the CCWG’s page on the PQRI Web site, www.pqri.org.
The CCWG worked as a task group of ASTM subcommittee D10.32 while writing the standard. The standard is available from ASTM International for $39. It can be obtained from ASTM at
www.astm.org/Standards/D7709htm.
The working group urges all interested parties to obtain the standard and apply it to their evaluation of solid oral drug packages. Those who want further participation in application of this standard and development of other standards can join ASTM subcommittee D10.32 on Consumer, Pharmaceutical, and Medical Packaging.
To learn more, contact Diane Trinsey at dtrinsey@astm.org.
 
 
No votes yet

Each bullet point represents

Each bullet point represents a glaring mistake, any one of which can be fatal for a résume..
letmewatchthis

This post is exactly what I

This post is exactly what I am interested. we need some more good information. Please add more good information that would help others in such good way.Ornamental Aluminum Fence

That’s a great site you folks

That’s a great site you folks have been carrying out there.
Activity center Lake Villa

It helps me a lot to enhance

It helps me a lot to enhance my knowledge, I really like the way the writer presented his views.look here

Howdy dudes! Wonderful stuff

Howdy dudes! Wonderful stuff protects it up.
the blog

genital warts cure for women

I like all information that you provide in your articles.
genital warts cure for women

Indoor inflatables Baton Rouge

Your work article, blogs I mean over all contents is must read stuff.
Indoor inflatables Baton Rouge

I appreciate it. It’s hard to

I appreciate it. It’s hard to sort the good from the bad sometimes, but I think you’ve nailed it. buy youtube views

It proved to be Very helpful

It proved to be Very helpful to me and I am sure to all the commenters here! Entrümpelungen München

I had trouble finding the

I had trouble finding the same info elsewhere. This was the first place that told me the answerzappos

dfwt

We had to cancel work on Friday because there were 60 MPH winds forecasted which would make very hazardous conditions under 100 foot tall burnt dead trees.
This week was pretty normal at work there was no camping in the extreme cold or dealing with animals in the middle of the night.
university apparel|
yoga wear|

divorce lawyer los angeles

These values are typical of coated and laminated barrier blisters currently in use.divorce lawyer los angeles

Accountant Central Coast 

I have been intelligent for hours and I haven't gone through such awesome stuff.
Accountant Central Coast

Outdoor Furniture Online

Nor do they hesitate to adopt confusing terminology, calling the same idea by different names, or different structures by the same name.” Outdoor Furniture Online

los angeles divorce lawyer

I appreciate you making this article available, the rest of the site is also high quality. Have a fun. Great work.
los angeles divorce lawyer

Steel Fence Panels

I have been wallowing on this for quite sometime and here I am reading about it! I will actually try these tips and let you know how they work out! Steel Fence Panels

3 credit scores

Not that things have improved any but medical transcription, etc. are worthy and non-harmful means of making a living while I finish the novel.3 credit scores

We Buy Any Car

.I will sharing this information some other people.Thanks for published this information…We Buy Any Car

The working group urges all

The working group urges all interested parties to obtain the standard and apply it to their evaluation of solid oral drug packages. Check this for more